The graphite industry uses graphite conductive paint instead of graphite powder

The conductive coating outside the high-voltage cable sheath has been coated with graphite powder. Since the graphite powder is easy to float and fly in the air, the production environment is poor. The ground with graphite powder is very slippery and can easily fall. Graphite powder itself is also an electrical conductor. In the process of flying, if it enters the electrical switch, it will easily cause short circuit of the electrical switch after long-term deposition, which threatens production safety. The conductive coating coated with graphite powder has poor adhesion, and the external force is easily wiped off, and the hand is blackened with a gentle rub.

Qingdao Shengde New Material Technology Co., Ltd. is a professional manufacturer and researcher of graphite conductive coatings. Recently, it has developed a new product, which is an environmentally friendly water-based graphite conductive coating SD-276, which replaces graphite powder.

Graphite conductive coatings, also known as conductive graphite emulsions, have the following characteristics:

         1. The coating is firm and not easy to break off.
         2. Good conductivity and smooth coating.
         3. The coating amount is small and the cost is low.
         4. The coating film is not polished, and it can be applied after drying.
         5. The coating film can withstand humidity and temperature difference.
         6. The use site is clean and pollution-free.

The materials used in graphite conductive coating SD-276 are environmentally friendly materials, with water as the dispersion medium, and have safe and environmentally friendly characteristics during transportation, storage and use.

The graphite conductive coating SD-276 has been used in large cable companies at home and abroad, and the effect is very good, with the prospect of large-scale promotion.